Image 1 of 12
Image 2 of 12
Image 3 of 12
Image 4 of 12
Image 5 of 12
Image 6 of 12
Image 7 of 12
Image 8 of 12
Image 9 of 12
Image 10 of 12
Image 11 of 12
Image 12 of 12
Product details
C3 billet bar risers are one-piece machined replacements for compatible original handlebar mounts. They raise a 1 1/8-inch fatbar without stacking spacer blocks and preserve a deliberate balance between stiffness and the flex characteristics of the motorcycle’s clamp system.
Manufacturer: C3 Powersports
Highlights
A 0.2-inch horizontal offset lets the installer orient the riser to fine-tune cockpit reach. The current height families range from a stock-rise option through progressively taller positions, including a tall configuration intended for riders who need substantial standing-room adjustment. C3 includes its installation tool with the riser assembly. Plain top caps and compatible C3 top-clamp or handguard arrangements are available separately where applicable.
What’s included
The selected variant supplies the C3 risers and any motorcycle-specific fit hardware that the current product selector explicitly bundles into that configuration. A handlebar, handguards, optional plain top caps, and rigid bar-mount cones are separate unless identified otherwise.
Fitment and installation
Select the exact motorcycle first, then the desired riser configuration. Some bikes require a C3 fit kit, and some original handlebars are not 1 1/8-inch fatbars. Certain early Yamaha clamps and some aftermarket triple clamps are not compatible. Special-edition models may follow a different fitment generation, so use the selector rather than a general year rule. Confirm adequate brake-hose, throttle-cable, clutch-line, and wiring slack at full steering lock before final tightening, torque all fasteners correctly, and recheck alignment after the first ride.
