Image 1 of 3
Image 2 of 3
Image 3 of 3
Product details
The C3 Stuck Strap is a compact recovery aid designed to give a rider a better pulling position when a snowbike is buried. It loops around a suitable structural point and back through itself, creating a handle that improves footing and leverage compared with pulling directly on the machine.
Manufacturer: C3 Powersports
Why it matters
A simple strap can make recovery less awkward when the bike is sitting low in deep snow and normal handholds are difficult to reach. The high-visibility green material is also easier to locate if the strap is dropped in powder.
Construction and size
C3 specifies material rated above 800 pounds. The six-foot loop forms an approximately three-foot pulling handle when passed back through itself. Its compact form makes it practical to keep in a backpack, tunnel bag, or other accessible storage location.
What’s included
One continuous-loop recovery strap is supplied. No permanent mounting hardware is required.
Use notes
Loop the strap around a strong, suitable point such as a ski loop, A-arm, or fork area, then feed it back through itself before pulling. Choose the attachment point carefully so the strap cannot damage controls, hoses, wiring, bodywork, or a sharp edge. Inspect the strap before each use and discontinue use if the webbing or stitching is cut, badly abraded, heat-damaged, or otherwise compromised. This is a manual recovery aid, not a lifting sling or a substitute for safe recovery judgment.
