Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
Product details
The C3 snowbike ski scratcher is a simple trail-condition tool for times when the snow surface becomes hard, icy, or polished. Flip it down to direct snow spray toward the track and sliders for added lubrication and cooling, then return it to the stowed position when the bike is back in soft snow.
Manufacturer: C3 Powersports
Why it matters
Packed trails may not throw enough loose snow into the rear system. The scratcher creates a controlled spray from the ski area when those firm conditions make extra snow contact useful. Its flip-up design keeps it tidily out of the way during normal powder riding.
Fitment
This product is offered in configurations for supported YETI SnowMX, MTN.TOP, and Timbersled ARO or RIOT ski setups. Choose the exact snowbike-kit configuration in the selector. Fitment to an unlisted ski may require fabrication or experimentation and is not recommended unless the installer can independently verify mounting, travel, and clearance.
Installation and use
Follow the installation instructions for the selected configuration and confirm that the scratcher moves freely between its deployed and stowed positions. Before riding, check that its hardware is secure and that neither position interferes with the ski, suspension, track, or steering movement. Deploy it only when trail conditions call for additional snow spray, and stow it before returning to deep or loose snow.
